Fast alignment angles, vertical and horizontal correction, Pincushion and barrel adjustment, image distortion, image rotation to 180 °.
Each unit control 2 projectors and can be expanded with multiple IDW-102 to support an unlimited number of projectors.
Integrated with complete function key on the front panel and IR remote control. Geometric manual alignment up to 5 * 3 grids.
PC software is also available for deformation and alignment of geometry to a grid of 17x17. After completing the geometric alignment, the parameters can be stored inside the IDW-102, so no PC is required.
Performs a fusion of the edges in four directions. No limitation of the number of edge blending.
Complete and accurate adjustment in Edge Blending function and color correction.
Allows a black level setting of a selectable area to compensate for the leak of the projector light.
White balance and color correction for each projector (own setting for each projector).
Edge Blending homogeneous Projection on flat or curved surface, including an irregular curved surface and a curved surface 360
Active and passive 3D
3D automatic signal decoding for passive 3D display, including Blue Ray source, STB, game console, media player and PC.
Automatic decoding Stereoscopic Player / Nvidia 3D Vision 1080p @ 120Hz 3D format and 3D Blue Ray 1080p 24Hz signal at 720p / XGA 120Hz for active 3D display.
standard HDMI 1.4a 3D support including 1080p / 24Hz full HD, Side by Side, Top-Bottom, and sequential image interlaced line.
Supports 3840x1080 Full HDSide by Side 3D | SONY 1080i / 60Hz frame packed 3D.
"Synchro perfect" picture zero latency algorithm for perfect 3D experience.
3Ddisplay can be on flat and curved display. It can be expanded by adding spotlights and perform Stacking or Edge blending setting.
High-end 10-bit video processor
Premium 10-bit processor with adaptive motion 3D deinterlacing, smoothing algorithm angles, a method of detecting film 3: 2/2: 2 and a recovery function.
Full function color adjustment including brightness, contrast, hue, saturation, color preset mode and a RGB color independent adjustment.
Image split and site selection.
Overlap adjustments up to 900 pixels for the image position, bezel compensation and Creative Zone "overlap" for the Edge Blending setting.
Login with input signal 2k / 4k.
Video wall controller to display a 15x15 matrix.
Rotate and image flip
Full function through the panel keypad before, IR remote control and RS232 port.
RJ45 Ethernet control optional
simple and user friendly interface.
Five preset profiles to save user settings and can be recalled at any time.
Able to save the settings in the PC and then duplicate it to other units
IDW-102 can be controlled by RS-232 and Ethernet (RJ45). By connecting with WiFi router, the user can control the processor by mobile phone, iPad or laptop via a wireless connection.